Bando P40-S14M-60 STS MPB Timing Belt Pulley CWBS - CONTACTORS FOR SAFETY APPLICATIONSBando P40 S14M 60 The type of pulley used on a Synchro Link drive depends on a number of factors, including but not limited to, space available, ratios, center distances, horsepower being transmitted, speeds and user preference of mounting systems (i. e. QD, TL or Minimum Plain Bore). An Explanation of Synchro Link Drive Pitches With Synchro Link Drives, as with gear or chain drives, circular pitch (usually referred to as pitch) is a fundamental
Standard NEMA MG-1 Frequency 60 Hz Voltage 230/460 V Number of poles 6 Degree of Protection IP55 Synchronous speed 1200 rpm Output rating 7
02 HP - TEFC-IP55 - 2938 PHASETYPE 3_PHASE MOTOR ENCLOSURE TEFC-IP55 HORSEPOWER 4
5x(Code D) No load current 16
Flexible neoprene body resists oil
Bando - 102XL075G The extra durable
Bando - 250-DS8M-1600 Synchro-Link® Double Sided Timing Belts provide smooth
5 STACK 1 MOUNTING HUB/STUD MOTOR TYPE FHP OPPOSITE END BEARING SELF-ALIGN SHAFT END BEARING SELF-ALIGN AMBIENT 60 ROTATION CCW LEAD END REV SERVICE FACTOR 1 RUNCAPMFD 5 RUNCAPVOLTS 370 SHIPPING WEIGHT 10 THERMAL PROTECTION AUTOMATIC RESET BREAKDOWN TORQUE 29
Standard NEMA MG-1 Frequency 60 Hz Voltage 230/460//190/380 V Number of poles 6 Degree of Protection IP55 Synchronous speed 1200 rpm Output rating 3 HP Mounting B3L(E) Flange Without Terminal box¹ Right position Enclosure IC411 - TEFC
30 min Control voltage 24-60V 50/60Hz-DC Color Blue
7 POLES 4 NUMBER SPEEDS 1 RPM 1750 RPM 2 1750 HERTZ 60 VOLTS PRIMARY 230/460 VOLTS 460 VOLTS 2 230 FRME 184 SHAFT CODE T MOUNTING HORZ-FOOTED ASSEMBLY POSITION F1 MOTOR TYPE LE OPPOSITE END BEARING 6205-J/C3 SHAFT END BEARING 6206-J/C3 AMBIENT 40 SERVICE FACTOR 1 STARTCAPMFD N\A SHIPPING WEIGHT 110 INSULATION CLASS F KVA CODE LETTER J NEMA NOMINAL EFFICIENCY 89
1x(Code H) No load current 160 A Rated torque 1030 ft
Power supply 200-240 V Input phases Three-phase Configuration With options Rated current (ND) 86 Rated current (HD) 70 RFI filter Without filter Enclosure IP55 Dynamic braking Standard with braking Safety Stop No Electronic supply Internal Attributes
