WEG SSW900E0670T5E3B SOFT-STARTER SSW900E0670T5E3B CLOSE COUPLED JM/JP - ROLLED STEELSoft starters are drives dedicated to the smooth acceleration and deceleration of three phase electric motors, by controlling the voltage applied to the motor. With proper adjustment of the variables, the torque produced is adjusted to the load requirement, thus ensuring that the requested current is the minimum required for starting. The SSW900 is a soft starter with three phase motor control, built in by pass and torque control. Intended to drive
1x(Code H) No load current 4
Model_Number K055RHE2140011B PRODUCT NAME
CSA 600 V Rated operational frequency - minimum 25 Hz Rated operational frequency - maximum 400 Hz Mechanical lifespan (AC) 10 million Mechanical lifespan (DC) 10 million Electrical lifespan Not available Degree of protection IP (IEC 60529) - Main circuit IP10 Degree of protection IP (IEC 60529) - Control circuit IP20 Rated current 80 A / (AC-6b - T = 55°C) 93 A Rated current In - AC-4 Not available Rated operational Current Ie AC-1 (¿ = 55 ºC) Not available Rated operational voltage Ue - IEC 60947-4-1 690 V Rated operational voltage Ue - UL/CSA 600 V Height 183 mm (7
weight³ 2220 lb Efficiency
2x(Code L) No load current 1
25 STARTCAPMFD N\A SHIPPING WEIGHT 140 BREAKDOWN TORQUE 299 BREAKDOWN TORQUE UOM PERCENT OF FLT LOCKED ROTOR TORQUE 234 LOCKED ROTOR TORQUE UOM PERCENT OF FLT INSULATION CLASS F KVA CODE LETTER H LOCKED ROTOR AMPS 64 NEMA NOMINAL EFFICIENCY 91
75 kW) Number of Poles 4 Frequency 60 Hz Rated speed 1760 rpm Slip 2
Degree of Protection IP55 Enclosure IC411 - TEFC Mounting F-2 Rotation¹ Both (CW and CCW) Noise level² 62
5 POLES 4 NUMBER SPEEDS 1 RPM 1770 RPM 2 1770 RPM 3 1760 RPM 4 1465 RPM 5 1465 HERTZ 60 HERTZ 2 50 VOLTS PRIMARY 230/460 VOLTS 460 VOLTS 2 230 VOLTS 3 208 VOLTS 4 400 VOLTS 5 200 FRME 215 SHAFT CODE T MOUNTING HORZ-FOOTED ASSEMBLY POSITION F1 MOTOR TYPE TCE OPPOSITE END BEARING 6206-J/C3 SHAFT END BEARING 6208-J/C3 AMBIENT 40 ROTATION DUAL SERVICE FACTOR 1
lb Locked rotor torque 190 % Breakdown torque 240 % Locked rotor time 52s (cold) 29s (hot) Moment of inertia (J) 0
lb Locked rotor torque 250 % Breakdown torque 300 % Locked rotor time 30s (cold) 17s (hot) Moment of inertia (J) 56
Degree of Protection IP55 Enclosure IC411 - TEFC Mounting B3T Rotation¹ Both (CW and CCW) Noise level² 70
