Bando 250-DS8M-1152 DS8M-1152 Timing Belt MECHANISM BASEBando 250 DS8M 1152 Synchro Link Double Sided Timing Belts provide smooth, precise performance under exacting drive conditions in serpentine drives common in printing, textile and packaging machinery. precision molding process assures "mirror image" symmetry, so both sides of the belt mesh with the pulley properly and provide maximum belt life. Flexible neoprene body resists oil, heat, ozone, grease, and moisture for maximum belt life. Strong,
0 a Bearing Grease Type Polyrex EM (-20F +300F) Drip Cover No Drip Cover Duty Rating CONT Feedback Device NO FEEDBACK Field Winding Type STAB SHUNT Frame Prefix MC Heater Indicator No Heater Insulation Class F IP Rating NONE Lifting Lugs Standard Lifting Lugs Mounting Arrangement F2 Overall Length 39
CDPSWD3426 SPEC
2 Ohms A Ph / 0 Ohms B Ph Rated Load Rated Load 0% 25% 50% 75% 100% 125% 150% S
CEM2506T SPEC
Polarity 4/2 Pole Fan Material Cast Iron Downloads
Frame 284/6JM Output 30 HP (22 kW) Number of Poles 4 Frequency 60 Hz Rated speed 1770 rpm Slip 1
4 a Front Face Code Drip Cover Mounting Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Inverter Ready KVA Code L Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 9 @ 16 AWG Motor Type 3636M Mounting Arrangement F1 Number of Poles 6 Overall Length 18
1 SERVICE FACTOR AMPS PRIMARY 16
XM25222T HP 20//15 VOLTS 230/460//190/380 AMPS 44/22//40/20 RPM 3530//2930 HZ 60//50 SER
625 IN Shaft Extension Location Pulley End Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator No Slinger Speed 1170 rpm 1760 rpm Speed Code 2S-2W-VT Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 None Winding Thermal 2 None Drawings
8 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Inverter Ready KVA Code K Lifting Lugs No Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 9 @ 18 AWG Motor Type 3530M Mounting Arrangement F1 Number of Poles 2 Overall Length 13
4 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Not Inverter KVA Code K Lifting Lugs No Lifting Lugs Locked Bearing Indicator No Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 6 @ 18 AWG Motor Type 3424LC Mounting Arrangement F1 Number of Poles 4 Overall Length 11
