Bando TL30-S14M-40 STS TL Timing Belt Pulley (2517) PESW SERIES (THREE-PHASE) NON-METALLICBando TL30 S14M 40 The type of pulley used on a Synchro Link drive depends on a number of factors, including but not limited to, space available, ratios, center distances, horsepower being transmitted, speeds and user preference of mounting systems (i. e. QD, TL or Minimum Plain Bore). With Synchro Link Drives, as with gear or chain drives, circular pitch (usually referred to as pitch) is a fundamental consideration. On the belt, pitch is the distance
EHM4103T-5 SPEC
0 V Design Code A Drip Cover Drip Cover Duty Rating CONT Efficiency @ 100% Load 92
Load 81° C Start Configuration DOL Break-Down Torque 20
Catalog Number EM3546T-5 Enclosure TEFC Frame 143T Frame Material Steel Frequency 60
0 V @ 60 HZ XP Class and Group None XP Division Not Applicable Agency Approvals CSA UR Ambient Temperature 40 °C Auxillary Box No Auxillary Box Auxillary Box Lead Termination None Base Indicator Rigid Bearing Grease Type Polyrex EM (-20F +300F) Blower None Current @ Voltage 41
37N854R224G1 FRAME 213TC VOLTS 230/460 FLA 18/9 RPM 3520 HZ 60 SER
@ 25° C 53
61 % Rated voltage 460 V Rated current 116 A L
Series ESWX Panel type Across the line Horsepower (HP) 7
2 POLES 2 NUMBER SPEEDS 1 RPM 3540 HERTZ 60 VOLTS PRIMARY 460 VOLTS 460 FRME 182 SHAFT CODE T MOUNTING HORZ-FOOTED ASSEMBLY POSITION F1 MOTOR TYPE CE OPPOSITE END BEARING 6206-J/C3 SHAFT END BEARING 6206-J/C3 AMBIENT 40 ROTATION DUAL SERVICE FACTOR 1
UL approval UL489 Trip curve D Number of poles 1 pole Rated current 6 A Maximum voltage 277 VAC / 60 VDC Type Thermal-magnetic Attributes
Terminal line reference Of earth type-T Accessory description End plate TF Supplement for accessories for terminal block line For triple screw type terminal BTWT Nominal section of borne cable Unspecified Color component for terminal block Grey Max
