XMAX90 DIY 8 Spot Set Screw Terminals TB-608 Sundown Audio600 Series Aluminum Terminal Blocks, 1 0, 8 Spots, M6 M8 Bolts, Pair Designed exclusively for our xMAX90 DIY, TB 680 allows for 8x bare wire connections on both the positive and negative terminals, allowing you to efficiently extract all the power from xMAX90 DIY. They are sold as a pair and constructed of 600 Series aluminum, allowing for high current capabilities. Included with the terminal blocks are both M6 and M8 bolts, allowing the connection of
MAX Amps – 6
08% FREQUENCY RESPONSE 20Hz-20KHz INPUT RANGE 250mV-10V SIGNAL TO NOISE >90dBA WORKING VOLTAGE DC 14
2 adds a pole-cap aluminum shorting ring which doubles as a heat-sink and airflow guide
Cutout Diameter: 277mm / 10
INTERNAL VOLUME AFTER SUBWOOFER DISPLACEMENT: 4
Overall Diameter: 260mm / 10
50 ft3 Tuning Frequency 37 Hz Port Area 24
Frequency Response: 10Hz - 250Hz
4 V) 480 W x 2 4 Ohm RMS Power (14
RMS POWER 6500W MAX POWER 15000W IMPEDANCE (OHMS) D1/D2 SENSITIVITY DB 86
6VDC — 1 OHM Load 3100W RMS N/A — 2 OHMS Load 1800W RMS 3100W RMS — 4 OHMS Load 970W RMS 1750W RMS Input Sensitivity (Level 100%) 400mV – 4V 400mV – 4V Signal-to-noise Ratio >90dB >90dB Frequency Response (Full Range) 10Hz ~ 20kHz (-3dB)** 10Hz ~ 20kHz (-3dB)** Crossover — HPF (High Pass Filter) 10Hz ~ 90Hz (-12dB/8°) Variable 10Hz ~ 90Hz (-12dB/8°) Variable — LPF (Low Pass Filter) 90Hz ~ 18kHz (-12dB/8°) Variable 90Hz ~ 18kHz (-12dB/8°) Variable Bass Boost — Frequency 30Hz ~ 70Hz Variable 30Hz ~ 70Hz Variable — Boost Level 0 ~ 10dB (50Hz) 0 ~ 10dB (50Hz) Efficiency 79% 82% Input Impedance 15K Ohms 15K Ohms Protection System Short-Circuit to Output
Ah – 67
