Bando TL1610 1 1/2 TL BORE 1 1/2 (1.500) S1.5M

Bando TL1610 1 1/2 TL BORE 1 1/2 (1.500) S1.5MBando TL1610 1 1 2 TL bushings are preferred where mounting space is at a premium. The TL bushing can only be installed in the conventional (large end outboard) position.

31 IN Power Factor 65 Product Family General Purpose Pulley Face Code C-Face Rodent Screen None RoHS Status ROHS NON-COMPLIANT Service Factor 1

Standard NEMA MG-1 Frequency 60 Hz Voltage 460 V Number of poles 8 Degree of Protection IP55 Synchronous speed 900 rpm Output rating 5 HP Mounting F-1 Flange C Terminal box¹ Left position Enclosure IC411 - TEFC

lb Locked rotor torque 130 % Breakdown torque 220 % Locked rotor time 10s (cold) 6s (hot) Design N Insulation Class F Temperature rise 80 K Service factor 1

VEM31109 SPEC

57 IN Power Factor 81 Product Family Wash Down All Stainless Steel Pulley End Bearing Type Sealed Bearing Pulley Face Code C-Face Pulley Shaft Indicator Standard Rodent Screen None RoHS Status ROHS COMPLIANT Service Factor 1

@ 25° C 24 Ohms A Ph / 0 Ohms B Ph Temp

Load 67° C Start Configuration DOL Break-Down Torque 511 LB-FT Pull-Up Torque 203 LB-FT Locked-Rotor Torque 247 LB-FT Starting Current 795 A Rated Load Rated Load 0% 25% 50% 75% 100% 125% 150% S

Bando - 16PK965 Trusted by the world's Top Automakers

Bando - 800-S14M-1246 C-X

5 RATING 40C AMB-CONT CC 010A DE 6206 ENCL TEFC Performance

06 HOT AMPS 3

SHUNT Heater Indicator No Heater Insulation Class F Lifting Lugs Standard Lifting Lugs Mounting Arrangement F1 Overall Length 54