Bando 100-S1.5M-185 S1.5M-185 Timing Belt C-Frame - Skeleton Motors

Bando 100-S1.5M-185 S1.5M-185 Timing Belt C-Frame - Skeleton MotorsBando 100 S1. 5M 185 Unique modified curvilinear tooth form enables the STS belt to transmit greater loads than like sized drives having the standard high torque tooth profile. Smoother tooth engagement and direct contact of belt tooth top with the pulley grooves enables the belt to run quietly even at high speeds. As the tooth meshes with the pulley grooves, the cord lay forms an almost true circle, minimizing the cantilever effect on the cords,

EM2550T SPEC

0 A Rated torque 587 ft

375 IN Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator Shaft Slinger Speed 1780 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Winding None Drawings

35X060M362G1 HP 3 VOLTS 230/460 AMP 8/4 RPM 1800 FRAME 182TC SER

0 % Electrically Isolated Bearing Not Electrically Isolated Enclosure Modification 841 Feedback Device NO FEEDBACK High Voltage Full Load Amps 32

8 RPM 1725/850 FRAME 145T SER

Bando - 150-S3M-696 Unique modified curvilinear tooth form enables the STS belt to transmit greater loads than like-sized drives having the standard high torque tooth profile

6 LB-FT Locked-Rotor Torque 31

Smart ElectricSE5822

27 LB-FT Locked-Rotor Torque 9

Degree of Protection IP55 Enclosure IC411 - TEFC Mounting B3L(E) Rotation¹ Both (CW and CCW) Noise level² 75

5 HP - ODP - 3450 PHASETYPE 1_PERMANENT SPLIT CA MOTOR ENCLOSURE ODP HORSEPOWER 7