Bando 250XL100G XL Timing Belt Banflex Combo Metric-V Polyurethane

Bando 250XL100G XL Timing Belt Banflex Combo Metric-V PolyurethaneBando 250XL100G The extra durable, highly flexible neoprene backing provides excellent abrasion and wear resistance especially important if power is transmitted from the back of the belt. Backing also guards the tensile cords against oil, grease, dirt, and moisture. Continuous, helically wound high strength fiberglass tensile cords guarantee dimensional stability to eliminate take up adjustments. Heavy torque loads wont fatigue this super strong cord.

VEJMM3116T-5 SPEC

180 Line Amps 5

875 IN Shaft Extension Location Pulley End Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator No Slinger Speed 3525 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Wye Start - Delta Run Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 None Winding Thermal 2 None Drawings

CWDM3538 SPEC

2 % Enclosure Modification Severe Duty Features Feedback Device NO FEEDBACK High Voltage Full Load Amps 501

34F492-2413G1 HP

2x(Code H) No load current 46

Frame 324T Output 40 HP (30 kW) Number of Poles 4 Frequency 50 Hz Rated speed 1475 rpm Slip 1

0 V @ 60 HZ XP Class and Group None XP Division Not Applicable Agency Approvals UR CSA Ambient Temperature 40 °C Auxillary Box No Auxillary Box Auxillary Box Lead Termination None Base Indicator Rigid Bearing Grease Type Polyrex EM (-20F +300F) Blower None Current @ Voltage 36

0 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Not Inverter KVA Code J Lifting Lugs No Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 7 @ 18 AWG Motor Type 3535LC Mounting Arrangement F1 Number of Poles 4 Overall Length 14

lb Locked rotor torque 300 % Breakdown torque 320 % Locked rotor time 28s (cold) 16s (hot) Moment of inertia (J) 0

230/460 V 60 Hz 8P 380 V 50 Hz 8P IE2 400 V 50 Hz 8P IE2 415 V 50 Hz 8P IE3