Fasco D130 OEM Replacement Motor, 1/40 HP, 1 Ph, 60 Hz, 115 V, 1550 RPM, 1 Speed, 3.3" Diameter, OAO Fan - Centrifugal

Fasco D130 OEM Replacement Motor, 1/40 HP, 1 Ph, 60 Hz, 115 V, 1550 RPM, 1 Speed, 3.3" Diameter, OAO Fan - CentrifugalOEM Direct Replacement Motor 3. 3" Diameter Shaded Pole Thermally Protected Enclosed Shaft End End Frame, Open Opposite Shaft End End Frame, Semi Enclosed Shell, Air Over Class B Insulation, 40C Ambient Sleeve Bearing 5 16" Diameter Shaft with Flat 12" Leads Extended Studs Shaft End and Lead End Additional Information Thermal ProtectionThermally Protected Speed1550 rpm Current1. 00 A Number of Speeds1 Ambient Temperature40 C ULRecognized Insulation

lb Locked rotor torque 300 % Breakdown torque 350 % Locked rotor time 52s (cold) 29s (hot) Moment of inertia (J) 0

6x(Code H) No load current 10

29 BREAKDOWN TORQUE UOM OZFT LOCKED ROTOR TORQUE 4

67 % Rated voltage 415 V Rated current 602 A L

pilot lights CSW TYPE Direct w/integrated LED-CSW F SUPPLY VOLTAGE 110-130V50/60Hz-DC LAMP VOLTAGE Unspecified Dissipation power (W) 1

2 BREAKDOWN TORQUE UOM OZFT LOCKED ROTOR TORQUE 39

0 V @ 60 HZ XP Class and Group None XP Division Not Applicable Agency Approvals CSA EEV NEMA PREMIUM NEMA_PREMIUM UR Ambient Temperature 40 °C Auxillary Box No Auxillary Box Auxillary Box Lead Termination None Base Indicator Rigid Bearing Grease Type Polyrex EM (-20F +300F) Blower None Current @ Voltage 46

Amperes 3306 A LRC 6

0 V @ 60 HZ XP Class and Group None XP Division Not Applicable Agency Approvals CURUSEEV Ambient Temperature 40 °C Auxillary Box No Auxillary Box Auxillary Box Lead Termination None Base Indicator No Mounting Bearing Grease Type Polyrex EM (-20F +300F) Blower None Current @ Voltage 4

Model BCWTC050V29A4-N Protection device Non-fused Rated voltage 240

Load 59° C Start Configuration DOL Break-Down Torque 12 LB-FT Pull-Up Torque 10

lb Locked rotor torque 140 % Breakdown torque 190 % Locked rotor time 48s (cold) 27s (hot) Moment of inertia (J) 23