Bando TL20L100 TL Timing Belt Pulley (1008) HYDRAULIC PUMPBando TL20L100 The type of pulley used on a Synchro Link drive depends on a number of factors, including but not limited to, space available, ratios, center distances, horsepower being transmitted, speeds and user preference of mounting systems (i. e. QD, TL or Minimum Plain Bore). With Synchro Link Drives, as with gear or chain drives, circular pitch (usually referred to as pitch) is a fundamental consideration. On the belt, pitch is the distance
0 a Heater Indicator No Heater Insulation Class B Inverter Code Inverter Duty IP Rating IP55 KVA Code G Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator Locked Bearing Max Speed 5400 rpm Motor Lead Termination Flying Leads Motor Type 1046M Mounting Arrangement F1 Number of Poles 2 Overall Length 27
High Efficient 7/16-20 Thread
Model_Number K048TBD3640013B PRODUCT NAME
EM3218T-5 SPEC 36G548S594G2 HP 5 VOLTS 575 AMPS 5
5 kW) Number of Poles 2 Frequency 60 Hz Rated speed 3545 rpm Slip 1
15 STARTCAPMFD N\A SHIPPING WEIGHT 525 BREAKDOWN TORQUE 262 BREAKDOWN TORQUE UOM PERCENT OF FLT LOCKED ROTOR TORQUE 212 LOCKED ROTOR TORQUE UOM PERCENT OF FLT INSULATION CLASS F KVA CODE LETTER G LOCKED ROTOR AMPS 309 NEMA NOMINAL EFFICIENCY 94
Load 34° C Start Configuration DOL Break-Down Torque 3
625 IN Shaft Ground Indicator Shaft Grounding Shaft Rotation Reversible Speed 1765 rpm Motor Standards NEMA Thermal Device - Bearing None Thermal Device - Winding Normally Closed Thermostat Drawings
5 FULL LOAD AMPS PRIMARY 41-36/18
2 kW (3 HP) Number of Poles 6 Frequency 50 Hz Rated speed 960 rpm Slip 4
Bando - TL1310 1 1/4 TL® bushings are preferred where mounting space is at a premium
3 POLES 4 NUMBER SPEEDS 1 RPM 1780 HERTZ 60 VOLTS PRIMARY 575 VOLTS 575 FRME 326 SHAFT CODE T MOUNTING HORZ-FOOTED ASSEMBLY POSITION F1 MOTOR TYPE DE OPPOSITE END BEARING 6211-2Z-J/C3 SHAFT END BEARING 6311-2Z-J/C3 AMBIENT 40 SERVICE FACTOR 1
