SafeLink Steel Sleeve Semi-Automatic Cold Saws

SafeLink Steel Sleeve Semi-Automatic Cold SawsSafeLink Bases The SafeLink Steel Sleeve is an embedded base that provides extra reinforcement for the post when used with the Safewaze SafeLink HLL System. Specifically engineered for areas with heightened seismic activity, this sleeve enhances the overall stability of the system. Features: Alternative to FS EX2504 for use in seismic regions Cast in place at a minimum depth of 11" (279. 4 mm) No closer than 3 1 2" (89. 9 mm) to any concrete edge Must

Round base for loose or sandy grades

This prevents obstructions and allows the gas to flow freely

Front to back: 15 3/4 Inch

Special Features

It is highly recommended to use a vacuum system when dry grinding as this tooling will create large amounts of dust

Precast concrete

Curtain wall systems

PCB0600CDS

Yellowing test on the Xenon chamber 3 years (ISO11341) High Minimum reaction temperature +10 °C Minimum temperature of use after hardening -25 °C Maximum temperature of use after hardening +60 °C Working time at 25 °C (time for polishing or cutting) 24 hours SDS Report Part A below

or stains - Comes with a 9200 Clutch Plate and Riser

Color Finish: Silver

Improved Jobsite Productivity