FMZ 1JZ / 2JZ Heater Core Delete Kit Engine:2JZ

FMZ 1JZ / 2JZ Heater Core Delete Kit Engine:2JZThis kit is designed to remove the factory metal hard line from the back of the OEM thermostat housing and replace it with a billet fitting and high quality AN line kit. This helps with water circulation through the back of the cylinder head and yields cooler engine temperatures. You will need to remove the factory metal sleeve that is pressed into the head and tap the OEM cylinder head to install the adapter fitting. These are made with 10AN hose.

USB programming cable and Software on a USB drive

it does have its drawbacks

two-connector ECU

7 fuses and pins for the 2 spare power circuits

Nitrous Ports can be added to the adapter as well

Our coil bracket is specifically designed to seal the spark plug well on the rocker cover with a close O-ring fit

This Motor Plate allows you to delete the side engine brackets

8 x Fuel Injection Outputs

Mechanical throttle stops need to be put in place and the entire process can be a real headache

Our 1JZ/2JZ Heater Core Delete Kits include:All AN Fittings needed for installationAN Hose (AN Fittings come pre-installed)DEI Heat SleeveBillet FMZ Thermostat Housing FittingThread Tap for cylinder head

Suits: Nissan R34 GTR Skyline

In many states