Connector Kit for 12.4"/15.0" DoubleHelix™ outergrade2-32

Connector Kit for 12.4"/15.0" DoubleHelix™ outergrade2-32Set of Connector Tiles for the 12. 4" 15. 0" DoubleHelix (This DoubleHelix Connector kit is specifically designed to match Kato Unitrack curves with radius 12. 4" 315mm and 15. 0" 381mm.) Two sets of connector tiles for the 12. 4" 15. 0" DoubleHelix designed for set track and flex track. These tiles are uniquely designed to connect the inner and outer helix at the bottom and top of the 12. 4" 15. 0" double helix. This set of tiles can be used for the

This helix rises 2 13/16" per turn and has a maximum rise of 22 5/8"

Available exit points in the top loop of this helix are at the following vertical rises: 4 1/8 turns: 19 1/2"

4 3/4 turns: 12 1/2"

8 turns: 26 "

7 7/8 turns: 24 1/2"

6 5/8 turns: 24 3/8"

This helix rises 3 " per turn and has a maximum rise of 15 1/8"

7 5/8 turns: 19 3/4"

Available exit points in the top loop of this helix are at the following vertical rises: 6 1/8 turns: 17 1/4"

This helix rises 3 3/8" per turn and has a maximum rise of 23 5/8"

7 1/4 turns: 19 1/8"

This helix rises 3 7/8" per turn and has a maximum rise of 7 3/4"