Waterlinked Locator D1 Cable Length:50m with Binder Connector

Waterlinked Locator D1 Cable Length:50m with Binder ConnectorFully integrated Locator device with its own depth sensor and tether. Typical Applications Underwater vehicles and equipment without a twisted pair tether and where permanent submerging may be a requirement. Benefits Extremely small footprint enabling easy integration fixation Highly robust operation in areas with acoustic reflections (shallow water, around installations, inside tanks etc.) No GPS based time sync. This enables operation inside

4-pin JST GH extension cable (200mm)

The Mark III system can remain submerged indefinitely without fear of slant range accuracy drift

The High-Power Tether Cable is designed to be used with the Outland Technology Power Supply System

10 x mixing sticks

4 x M3x16 socket head cap screw (316 stainless steel)

1km @ 115kbaud Connector Teledyne Impulse IE55-1206-BCR

8° (selectable) Scan Speed 4sec / 360° @ range 5m

The tool holds the Wetlink Penetrator bulkhead during assembly and is compatible with M06

This aluminium endcap with 15 holes is for use on the 6″ Series Watertight Enclosure

NOTE : Resolution does not equal accuracy

1 x 6″ Left Angle Micro-USB to USB-A Cable

The slant range is calculated from the round-trip time of flight