Bando TL72-S8M-40 STS TL Timing Belt Pulley (2517) MiningBando TL72 S8M 40 The type of pulley used on a Synchro Link drive depends on a number of factors, including but not limited to, space available, ratios, center distances, horsepower being transmitted, speeds and user preference of mounting systems (i. e. QD, TL or Minimum Plain Bore). With Synchro Link Drives, as with gear or chain drives, circular pitch (usually referred to as pitch) is a fundamental consideration. On the belt, pitch is the distance
Catalog Number CSSWDM3538-H Enclosure TENV Frame 56HC Frame Material Stainless Steel Frequency 60
35 IN Power Factor 63 Product Family General Purpose Pulley End Bearing Type Ball Pulley Face Code C-Face Pulley Shaft Indicator Standard Rodent Screen None RoHS Status ROHS COMPLIANT Service Factor 1
5A ND Amps 60s 3
CAT NO IDVSWDM3546T SPEC
375 IN Shaft Extension Location Pulley End Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator Shaft Slinger Speed 1770 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 None Winding Thermal 2 None Drawings
GE5KSP39FG4771S
Model EHC16X-UBW225 Application Molded-case circuit breaker Product line UBW225 Type Extended rotary Shaft type Rigid Shaft/cable length 16' Degree of protection NEMA 4/4X Color Black
2 POLES 4 NUMBER SPEEDS 1 RPM 1725 HERTZ 60 VOLTS PRIMARY 208-230/460 VOLTS 208 VOLTS 2 230 VOLTS 3 460 FRME 48 STATOR DIAMETER 5
65 FULL LOAD AMPS PRIMARY 9
DRX28264T HP 20//15 VOLTS 230/460//190/380 AMPS 50/25//46/23 RPM 1180//980 HZ 60//50 SER
Smart Electric235245
lb Locked rotor torque 240 % Breakdown torque 280 % Locked rotor time 30s (cold) 17s (hot) Moment of inertia (J) 11
