Bando P44XL037A MPB TB Pulley ALUM 5/16 RESIDENTIAL PUMPSBando P44XL037A The type of pulley used on a Synchro Link drive depends on a number of factors, including but not limited to, space available, ratios, center distances, horsepower being transmitted, speeds and user preference of mounting systems (i. e. QD, TL or Minimum Plain Bore). With Synchro Link Drives, as with gear or chain drives, circular pitch (usually referred to as pitch) is a fundamental consideration. On the belt, pitch is the distance
Packard63985
9 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Not Inverter KVA Code M Lifting Lugs No Lifting Lugs Locked Bearing Indicator No Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 9 @ 18 AWG Motor Type 3512M Mounting Arrangement F1 Number of Poles 4 Overall Length 11
Rated Load 5
44 % Rated voltage 460 V Rated current 311 A L
IDDRPM25506 PH
1x(Code G) No load current 110 A Rated torque 1060 ft
6 % Electrically Isolated Bearing Not Electrically Isolated Feedback Device NO FEEDBACK High Voltage Full Load Amps 35
25 MOTOR TYPE FHP AMBIENT 40 ROTATION CW/CCW SERVICE FACTOR 1 RUNCAPMFD 5 RUNCAPVOLTS 370 SHIPPING WEIGHT 12 BREAKDOWN TORQUE 30
625 IN Shaft Extension Location Pulley End Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible: Connected Standard Shaft Slinger Indicator No Slinger Speed 1700 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 Automatic Thermal Overload Winding Thermal 1 Location EP Winding Thermal 2 None Drawings
Catalog Number EM4410T-4 Enclosure TEFC Frame 444T Frame Material Iron Frequency 60
5 MOTOR TYPE FHP OPPOSITE END BEARING 6203 SHAFT END BEARING 6203 AMBIENT 40 ROTATION CCW LEAD END REV SERVICE FACTOR 1
35SS605G004G1 HP 1 VOLTS 230/460 AMP 3
