Safety Strap for Anchor & Outboard Motor Aux Engine Bracket Stainless Steel 1/2" Drive Torque Wrenches

Safety Strap for Anchor & Outboard Motor Aux Engine Bracket Stainless Steel 1/2" Drive Torque WrenchesThis safety strap is used as a back up to prevent the loss of outboard motors and anchors. Stops your outboard sinking if it vibrates loose and falls off the bracket. Also used as a safety for stowed anchors stops the anchor deploying by accident if the electric windless clutch fails. Made from marine grade stainless steel (316 ANSI graded). Suitable for salt water use. Twin stainless steel carabiner for easy attachment. 60cm Total Length. Plastic

Abrasive blasting erodes the surface

top and bottom

- 1 x Pry Bar - total length 600mm - total width of the pry bar 12mm

3 pc paint brush containing 3 different width heads

Helps prevent damage to the vehicles bumper when hitching and unhitching trailers or caravans

This listing is for a pair of 46cm long prop stands and pressed steel clamps for trailers

This guide shows the standard wiring colours

can be cleaned with most non-abrasive cleaners

Medium Size suitable for user weight 30kg to 50kg

On an unbraked trailer this must hold the trailer to the car if the hitch came off the tow ball and it is a 3 point penalty offence if one is not fitted or used

Damper Body Length 380mm

If it is not then you should note which pin number each wire goes to before removing the old plug and simply connect the new one the same