Bando 100-S3M-303 S3M Timing Belt Rib Ace V-Rib

Bando 100-S3M-303 S3M Timing Belt Rib Ace V-RibBando 100 S3M 303 Unique modified curvilinear tooth form enables the STS belt to transmit greater loads than like sized drives having the standard high torque tooth profile. Smoother tooth engagement and direct contact of belt tooth top with the pulley grooves enables the belt to run quietly even at high speeds. As the tooth meshes with the pulley grooves, the cord lay forms an almost true circle, minimizing the cantilever effect on the cords,

Load 47° C Start Configuration DOL Break-Down Torque 10

2 a Frame Prefix D Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Not Inverter KVA Code K Lifting Lugs No Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 9 @ 16 AWG Motor Type 3632M Mounting Arrangement B14 Number of Poles 4 Overall Length 15

Amperes 222 A LRC 8

8 A Rated torque 143 ft

lb Locked rotor torque 250 % Breakdown torque 270 % Locked rotor time 39s (cold) 22s (hot) Moment of inertia (J) 301 sq

134 LOCKED ROTOR TORQUE UOM OZFT INSULATION CLASS B LOCKED ROTOR AMPS 10

lb Locked rotor torque 160 % Breakdown torque 200 % Locked rotor time 68s (cold) 38s (hot) Moment of inertia (J) 44

03 Ohms A Ph / 0 Ohms B Ph Temp

000 HP Agency Approvals CSA Ambient Temperature 40 °C Armature Current 16

Standard NEMA MG-1 Frequency 60 Hz Voltage 575 V Number of poles 6 Degree of Protection IP23 Synchronous speed 1200 rpm Output rating 30 HP Mounting F-1 Flange Without Terminal box¹ Left position Enclosure IC01 - ODP Electric Motors

Bando - 80XL100G The extra durable

0 V Design Code N Drip Cover No Drip Cover Duty Rating CONT Efficiency @ 100% Load 56