Metric Socket Head Cap Screw Black-Oxide Alloy Steel Partial Thread M42 * 4.5 * 180MM, Grade 12.9 [Allen Key] nom_diam_19-64

Metric Socket Head Cap Screw Black-Oxide Alloy Steel Partial Thread M42 * 4.5 * 180MM, Grade 12.9 [Allen Key] nom_diam_19-64This socket head cap screw is 180 mm long and has a M42 * 4. 5 mm thread [partially threaded]. Made of black oxide alloy steel, it offers slight corrosion resistance in dry conditions. The cup point and 12. 9 grade increase its compressive strength and provide a tensile strength and hardness of 170,000 psi Rockwell C39. In addition, it has a shear strength of 102,000 psi. ISO Metric Pitch Coarse threads are an industry standard. These screws are

This hexagonal bolt has a length of 12" with a threading of 1-1/4-7 [Partially Threaded]

The screws have a thread of 1-1/2-6 and a length of 6

The sleeves has a 1-11-1/2 thread and an usable pressure of 150 psi

000 psi | Rockwell C19

High-strength Grade 100 hooks are approximately 20% stronger than Grade 80 hooks when used with chain of the same grade

It is made of A4 Stainless Steel [Equivalent 316 SS] and thus provides a high resistance to corrosion in dry and wet environments

This rod has a length of 36 and a thread of 1-14

Choose these fittings when you want the same high-quality found in our low-pressure pipe fittings

This hexagonal bolt has a length of 4-1/2" with a threading of 1-1/8-7 [Partially Threaded]

The ratchet buckle tightens incrementally for maximum tension

The elbows have a 1-11-1/2 thread and they are 90 degrees

The screws have a filetage of 3/4-10 and a length of 2